Here comes with new design AIO pod system from Aspire the Aspire Spryte, slim and stylish in 5 different color, olive green, grey, black, blue and purple. The Spryte contain an easy-filled 3.5ml/2ml pod, very comfortable to hold it in your hand. It utilizes Aspire’s well-known BVC coil and comes with a regular 1.8ohm coil and second one 1.2 ohm for use with nicotine salts.
The Spryres sleek minimalist design fits well in pocket or purse and the protective top cap fits snugly on to the bottom of the device when in use.
Unusually for an AIO pod device of this type, the Aspire Spryte has an adjustable airflow system to suit your vaping preference.
The well-known and trusted BVC coil Aspire Spryte atomizer uses nichrome wire. It has two coils, one for regular e-liquid and one for nicotine salts use. It also works equally well with normal e-liquids.
The pod in the Aspire Spryte is an easy to use pull-out- push and click system. it is bottom fill using a simple but effective silicone plug in the base of the pod, with a generous 4.6mm filling hole, to suit types of e-liquid bottle.
The standard BVC and nic-salts BVC, whichever type of coil you use are all easy to install. Simply remove the pod and turn it upside down, remove the chimney unit and screw in your chosen coil. Replace the chimney unit with attached coil and reinsert into the pod. Push the pod back to the Spryte until it clicks.
Note: Please always let the device stands for 5 minutes to allow the coil to become saturated when you insert a new coil and fill the pod. It can help with avoiding dry hits and damage to the coil.
It is super easy to refill the pod. Just remove the pod from the device, invert the pod and remove the silicone plug from the 43.6 diameter filling hole. Fill the pod with e-liquid, and replace the silicone plug securely. Then replace the pod into the device by pushing down until it clicks into place. Now it is ready to use.
It is also very simple to charge the Aspire Spryte. Plug in the supplied micro usb cable into the base of mod, attach the end to a suitable power supply to charge. The maximum charge current can reach up to 1000mA. When the charger is connected, the LEDS will flash blue and red three times. When fully charges the LEDS will flash blue and red twenty times then remain off
Unit: 1 set
Color: Olive green,Grey,Black,Blue,Purple
Package: Gifts Box
Each set contain:
1pc Spryte Device
2pcs Extra O rings
2pcs Coils(1.8ohm regular BVC & 1.2ohm for Nic Salt)
1pc Silicone seal
1pc Micro USB cable
1pc Warranty Card
1pc User Manual